deformation

常見例句

• Changing stresses bring about more cracking and rock deformation.
  不斷變化的應力導致更多的斷裂和巖石變形。
• a deformation of the spine
  脊柱的畸變
• Normally, enormous deformation is abnormal.
  通常，巨大的變形是不正常的。
• a deformation of the spine
  脊柱的畸變
• Changing stresses bring about more cracking and rock deformation.
  不斷變化的應力導致更多的斷裂和巖石變形。
• With decreasing fractal dimension, the softening degree increases and the deformation resistance decreases.
  分形維數越小, 軟化過程進行得越充分,金屬的變形抗力越小.
• Its characteristics include fast cutting , narrow and small deformation etc.
  具有切割速度快, 割縫小等特點.
• In order to research the deformation and failure adoptingmodel experiment , the numerical simulation method to analyzes.
  總結高陡路塹邊坡變形與破壞的類型, 分析其影響因素.
• A polarized scanning camera used for dynamic measurement of thermal deformation fields is proposed.
  提出了利用偏振掃描相機進行激光散斑照相,研測了物體的二維熱形變場.
• Significant mechanochemical coupling in dynamic deformation block rock and powder samples after experiments.
  結果表明,動力變形中發生了明顯的力學化學耦合作用.
• Note ensure that the printer does not make the pressure relief image flattening or deformation.
  奪目包管打印機不張力不會使浮雕影像變平或變形.
• Main inducement is to get friction for a long time, shoe disagreement foot and sufficient deformation.
  主要誘因是長期受摩擦, 鞋不合腳和足畸形等.
• The reason of deduces deformation martensite in the drawing process is analysed also.
  并分析了拉拔時產生形變馬氏體的原因.
• After scientific bamboo mosaic from the high temperature and high pressure, high deformation difficult.
  竹材經過科學的高溫高壓拼接而成, 超高不易變形.
• In this paper, the effect of room temperature deformation on boronization is investigated.
  本文研究了室溫形變對滲硼過程的影響.
• Works of art and design shape and deformation in the main realistic.
  藝術設計作品的造型以寫實和變形為主.
• Thermal deformation temperature and liner expansion coefficient of the composite were decreased.
  該復合材料的熱變形溫度有所降低,但線膨脹系數減小.
• The calculated deformation is almost equal to the real situation by measurement.
  經檢測,計算變形量與實際情況基本一致.
• Approximate solution of grinding force has been resulted by weighted residual method from grinding bar's deformation.
  本文從磨桿的變形反推磨削力的角度,應用加權殘數法導出了近似解.
• Torsion deformation is the biggest effect factor on elastic limit equivalent stress.
  扭轉變形是對鋼絲的彈性極限等效應力情況影響最大的因素.
• Computational result shows that the deformation of tidal wave is changed slowly with the roughness increasing.
  通過建立一維涌潮數學模型,以概化矩形斷面河道為對象,對不同糙率下的潮波變形進行分析比較.
• The most wear form is adhesive wear, arc erosion and plastic deformation.
  粘著磨損 、 電弧侵蝕、塑性變形是其主要的磨損形式.
• The dynamic deformation process of sheet metal on the EMF was investigated.
  分析了平板電磁成形的動態過程.
• A method to predict residual deformation based on inherent strain was introduced.
  闡述了以固有應變?yōu)榛A(chǔ)的彈性板單元有限元?dú)堄嘧冃晤A(yù)測法.
• This paper studies its mechanism from stabilization, deformation and combined action.
  本文從變形、受力和共同作用等方面研究其工作機理.
• Longitudinal contraction deformation: The component contracts in the weld direction after welding.
  縱向收縮變形: 構件焊后在焊縫方向上發生的收縮.
• Changing stresses bring about more cracking and rock deformation.
  不斷變化的應力導致更多的斷裂和巖石變形。
• Without loss of generality, shear deformations will be neglected.
  不失一般性, 忽略不計剪切變形.
• Neglect the axial deformations and consider only the lumped masses.
  略去軸向變形不計,僅考慮集中質量.
• With decreasing fractal dimension, the softening degree increases and the deformation resistance decreases.
  分形維數越小, 軟化過程進行得越充分,金屬的變形抗力越小.
• In order to research the deformation and failure adoptingmodel experiment , the numerical simulation method to analyzes.
  總結高陡路塹邊坡變形與破壞的類型, 分析其影響因素.
• Significant mechanochemical coupling in dynamic deformation block rock and powder samples after experiments.
  結果表明,動力變形中發生了明顯的力學化學耦合作用.
• Note ensure that the printer does not make the pressure relief image flattening or deformation.
  奪目包管打印機不張力不會使浮雕影像變平或變形.
• After scientific bamboo mosaic from the high temperature and high pressure, high deformation difficult.
  竹材經過科學的高溫高壓拼接而成, 超高不易變形.
• Works of art and design shape and deformation in the main realistic.
  藝術設計作品的造型以寫實和變形為主.
• Thermal deformation temperature and liner expansion coefficient of the composite were decreased.
  該復合材料的熱變形溫度有所降低,但線膨脹系數減小.
• The calculated deformation is almost equal to the real situation by measurement.
  經檢測,計算變形量與實際情況基本一致.
• Approximate solution of grinding force has been resulted by weighted residual method from grinding bar's deformation.
  本文從磨桿的變形反推磨削力的角度,應用加權殘數法導出了近似解.
• Torsion deformation is the biggest effect factor on elastic limit equivalent stress.
  扭轉變形是對鋼絲的彈性極限等效應力情況影響最大的因素.
• Computational result shows that the deformation of tidal wave is changed slowly with the roughness increasing.
  通過建立一維涌潮數學模型,以概化矩形斷面河道為對象,對不同糙率下的潮波變形進行分析比較.
• The most wear form is adhesive wear, arc erosion and plastic deformation.
  粘著磨損 、 電弧侵蝕、塑性變形是其主要的磨損形式.
• A method to predict residual deformation based on inherent strain was introduced.
  闡述了以固有應變?yōu)榛A(chǔ)的彈性板單元有限元?dú)堄嘧冃晤A(yù)測法.
• This paper studies its mechanism from stabilization, deformation and combined action.
  本文從變形、受力和共同作用等方面研究其工作機理.
• Longitudinal contraction deformation: The component contracts in the weld direction after welding.
  縱向收縮變形: 構件焊后在焊縫方向上發生的收縮.
• All the required elements of continuum mechanics, deformation theory and differential geometry are also covered.
  連續統一體力學, 變形理論和不同幾何學的全部被要求的要素也被包括.
• Study showed that angle deformation of T joint is changed along the welded seam length.
  研究表明,T形接頭的角變形沿焊縫長度方向是變化的.
• The compatible state of deformation between buried strain gauge and concrete is analyzed theoretically.
  從理論上分析了內埋式應變計與混凝土的變形協調關系.
• The thermal deformation calculation on base definition of expansion coefficient is analyzed.
  本文從熱膨脹系數基本定義出發對熱變形計算進行了較深入分析.
返回 deformation