load characteristic

基本解釋

• 負荷特性；[電] 負載特性；負載特性曲線

英漢例句

雙語例句

• Grasping the change rule and trend of power load characteristic is the key to establish load forecasting model.
  掌握電力負荷特性的變化規律和發展趨勢是建立負荷預測模型的關鍵。
• Based on this contact model, load characteristic of TWUSM is simulated numerically by using MATLAB method, and the simulated result is compared with test result.
  基于所建立的接觸模型，利用Matlab方法，模擬分析一種行波超聲電動機的負載特性，并與試驗結果進行了比較。
• The simulation results verify the high precision of the proposed compensation method regardless of the waveform of CT primary current, remanent flux level, and load characteristic.
  仿真結果驗證了所提補償方法的高精度，而且不受CT負載特性、CT剩磁情況及原邊電流直流成分的影響。

• load characteristic更多例句

詞組短語

短語

• load angle characteristic 負載角特性
• cooling load continuous characteristic 冷負荷延續特性
• Load displacement characteristic 壓力
• load transmission characteristic 荷載傳遞特征
• load distribution characteristic 載荷分布特性

• load characteristic更多詞組

專業釋義

電子、通信與自動控制技術

• 負荷特性

  The existingcomposite load model although can descripe load characteristic well, but it is relativequite complex, having many parameters to be recognized.
  現有的綜合負荷模型雖然能較好的描述負荷特性,但是該模型相對比較復雜,待辨識參數多。

• 負載特性

  The current waveform, rotor angle waveform and the load characteristic are analyzed. Combining theoretical analysis, it is proved that the control system of pulsator washing machine is reasonable.
  最后,在已完成的硬件、軟件基礎上,對波輪洗衣機的永磁同步電機驅動系統進行了測功機實驗和裝機實驗,尤其對電機在帶負載條件下的起動進行特別研究,對實驗所得的電流波形、轉角波形、負載特性進行詳細分析,結合理論分析證明所設計的波輪洗衣機驅動控制系統的合理性。

  土木建筑工程

• 負荷特性

  The operation schedule of mix system should be fit for the building load characteristic.
  說明了混合系統的運行方式的選取應當適合建筑自身的負荷特性。

  能源科學技術

• 載荷特性

  The results showed that the load characteristic of the solution system is very similar to the true load characteristic of the billet shear machine.
  其中節流閥方案很好的模擬了鋼坯剪斷機的實際載荷特性。

  計算機科學技術

• 負載特征

  In order to enhance the resources utilization and services availability of virtual machines migration, a virtual machine migration schedule strategy based on load characteristic is proposed.
  為提高虛擬機遷移時的資源利用率及服務可用性，提出一種基于負載特征的虛擬機遷移調度策略。

  動力與電氣工程

• 負荷特性
• 負載特征
• 負載特性

機械工程

• 負載特性